Little Giant RVMS-20 vertical float switch
RVMS-20 vertical float switch converts any manual pump up to 1/2 HP into an automatic pump.
Switch range from 0.75 inches to 6 1/2 inches. Power to the pump is controlled by plugging the pump power cord into the piggy back switch in the switch's 20 foot power cord.
Designed for use in confined areas and is not sensitive to turbulence.
This new pump switch provides automatic control of a pump in water and sewage effluent applications. The design allows it to operate in applications with limited space, such as small sump chambers. This switch is ideal for timed dosing applications where small amounts of sewage effluent are “dosed” or pumped into the drain field at one time. The float stop can be moved up the lift rod to adjust the pumping range from 6.5" (17cm) to .75" (2cm). It can also be used in areas as small as 4" wide (not including discharge pipe).
impact resistant housing
water resistant cable
for use in liquids up to 140 degrees F
stainless steel mounting bracket
12 month warranty
20 ft power cable (6 m)
max 13 Amps while running
Weight: 3 lbs (1.4 kg)
Click here for a larger view of this typical installation diagram image