Multiquip QP4TH honda powered trash pump

QP4TH honda powered trash pump

In stock
4", 555 GPM, 11 HP, Contractor grade, self priming, honda powered trash pump.
Multiquip is the most popular contractor grade pump brand in the US due to the superior performance, rugged construction, long life and simplified maintenance procedures.
Compare to the competition's equivalents: 1% Higher GPM than Honda WT40X, 42% higher than Yamaha YP40T, 15% higher thasn Kawasaki KWT40A, 7% higher than Tsurumi EPT2-100HA.
Maintenance reducing features include:
Cast iron suction and discharge nipples are easily replaced if threads get damaged.
Plastic fill and drain plugs eliminate corrosion between plugs and casings. Our unique Double volute design insures quick positive priming, minimal clogging, and optimum efficiency.
Engineered to meet the requirements of professional contractors. Rugged and dependable, this is ideal for dewatering applications with high solid content. Sticks, stones and debris easily pass through the pump, minimizing downtime due to clogging.
Open type two vane impeller easily handles solids and debris. Its ductile iron construction provides longer life than other materials.
free shipping
Normally In stock - If urgent call to check (toll free 877 266 3532) or order now if okay to ship tomorrow (Mon - Fri), we will contact you if there is a delay.

Cannot ship via UPS.
Commercial address required.

$3,182.80 $2,499 each

Suction Hose Options
Discharge Hose Options
Hose Related Accessories
Contractor grade
4" (101 mm) discharge size
555 gallons per minute (2100 liters)
Power: 11 HP (8.3 kw)

Self priming design
Includes screen for intake
cast ductile iron impeller
Honda GX-340 engine
Low oil shutdown: standard
1.58 gallon fuel tank (6 liters)
Starting Method: recoil
Total head: 92 ft (28 m)
Suction lift: 25 ft (7.6 m)
Max solid size: 2" (50 mm)
30.7" high (78 cm)
27.3" wide (69.5 cm)
30.1" long (76.5 cm)
Weight: 216 lbs (99 kg)

Click here for a larger view of this QP4TH performance graph image

We've got the largest possible clean out cover; only two hand knobs need to be turned to remove the cover. No special tools are required. No need to disconnect suction hoses or pipes. Attached to the clean out cover by two stainless steel screws is the two vane impeller making it easy to remove and/or inspect.
Includes strainer and a shock mounted heavy duty tubular steel frame for easy portability and component protection.
Self priming design. Simply fill the casing with water and you're pumping in seconds.

Click here to provide us with feedback about this site