Little Giant CV 114/112 check valve for use with sump pumps and effluent pumps available for online purchase with fast delivery with order tracking system.
Contractors Depot 48 Island Drive East PointFlorida 32328 Toll Free - 1 877 266 3532 USA - 850 670 1100 CCR CAGE #3H2R2
CV114/112 sump pump, effluent pump check valve fits both 1 1/4 inch and 1 1/2 inch pipe and also passes solids up to 1 inch in size.
Easy slip fit design makes installation easy whether being installed vertically or horizontally and the flexible unions slip over ABS, PVC or copper pipe.
Durable flapper designs checks back flow of water and sewage gasses.
$25 each
In stock - can ship today(Mon - Fri)
residential grade
Slip x Slip fit
15 ft power cable (5 m)
3" high (7.5 cm)
3" wide (7.5 cm)
7.25" long (18 cm)
Weight: 1 lbs (0.5 kg)
Installation Guidelines:
1. Valve may be installed horizontally or vertically.However,when installed in systems handling solids,valve must be installed horizontally or at a maximum of a 45 degree angle.This will guard against any solids lodging on top of valve flapper and preventing valve from opening on start-up.
2. Valves have flow direction arrows and horizontal and vertical position markings molded on them.Use horizontal position markings for all installations from horizontal to vertical to insure correct flapper pivot position.(Recommended maximum 45 degree angle on solids handling applications).
3. For submersible pump applications, drill a 3/16" hole in discharge pipe approximately 1"-2" above the pump discharge connection to prevent air locking of pump.
4. All discharge piping should be properly supported to prevent separation of pipe at valve.
